SAP Calculations Salford
Fixed-price SAP Calculations for Part L compliance in Salford and across Greater Manchester. Elmhurst accredited, revisions included.
- Part L compliant reports for Building Control
- Design Stage, As-Built SAP and EPC
- New builds, conversions and extensions
- Elmhurst accredited OCDEA
Prefer to talk? Give us a call on 0333 567 9010 and we'll be happy to help.
- Elmhurst Accredited
- Fully Insured
- 100s Projects Delivered
- FHS Ready
SAP Calculations for Salford Building Control
SAP (Standard Assessment Procedure) calculations are required for all new dwellings in Salford. Most conversions and some extensions need them too. They demonstrate compliance with Part L of the Building Regulations and are submitted to Building Control at both design and completion stages.
Whether you're building in Salford centre, the suburbs or anywhere across Greater Manchester, Building Control will want SAP Calculations that demonstrate Part L compliance. We produce the BREL reports your Building Control officer or approved inspector expects: a Design SAP for the plans stage, and an As-Built SAP at completion (which is used to generate the EPC and compliance report).
Practically: you send drawings and spec, we model it in SAP 10, then we tell you the quickest route to pass without "gold plating" the build — usually a handful of targeted tweaks.
Typical Salford Projects We Help With
New Build Homes
Infill plots, replacement dwellings and small to medium developments. We model realistic specifications and update the model throughout the build to avoid late-stage fails.
Extensions with High Glazing
Extensions with large doors or roof glazing often need SAP checks. We balance fabric performance to meet Part L, using one of the three methods available for extension compliance.
Conversions & Change of Use
Any building where the number of dwellings changes needs a Conversion SAP. We advise on insulation, ventilation and heating choices that keep compliance achievable.
As-Built SAP & EPC
When the build is complete, we finalise the as-built SAP and lodge the EPC. We tell you exactly what evidence is needed.
How the Process Works
-
1
Send Your Drawings
Upload plans, elevations, sections, and a site plan showing orientation. If you have a window schedule, include it — it's one of the most common missing bits we see.
-
2
We Model SAP 10
We model your dwelling in SAP 10 and check Part L targets. If it's tight, you get a short list of practical tweaks ranked by impact — so you're not guessing what to change.
-
3
Reports for Building Control
You receive the outputs Building Control expects, including the compliance report. At completion we turn the as-built assessment into the EPC once evidence is in place.
Areas We Cover Around Salford
We support projects across Greater Manchester and surrounding areas. Whether you're building in the town centre or the suburbs, we've got you covered.
- Eccles
- Swinton
- Worsley
- Irlam
- Pendleton
- Trafford
- Manchester
- Bolton
What We Need to Start Your Salford SAP Calculation
- Plans:floor plans, elevations and sections.
- Site plan:orientation / north point (critical for solar gains).
- Fabric build-ups:wall, floor and roof construction details with insulation thickness.
- Openings:window and door sizes plus U-values (a schedule is perfect).
- Heating & hot water:system type, controls and cylinder details (if applicable).
- Ventilation:extract fans, MVHR or MEV details (if known).
Frequently Asked Questions From Clients in Salford
How long does a SAP calculation take in Salford?
Most SAP calculations for projects in Salford are completed quickly once we have your drawings. Larger or more complex developments may take a little longer — we always confirm the expected turnaround before starting.
What happens if my SAP calculation fails?
A fail on first submission is common, especially on new builds and extensions in Salford where glazing levels or fabric performance are tight. We provide clear, practical recommendations to bring the design into compliance — usually a small number of targeted changes rather than a full redesign.
Do you cover the whole Greater Manchester area?
Yes. We work with builders, architects and self-builders across Greater Manchester and throughout the UK. SAP Calculations are produced from your drawings and spec, so we can support your project wherever you're building.
Will Building Control in Salford accept your reports?
Yes. We're an Elmhurst accredited OCDEA practice, producing Part L compliant SAP Calculations, BREL reports and EPCs that Building Control officers and approved inspectors expect to see.
Ready to Get Moving on Your Salford Project?
Upload your drawings and we'll confirm exactly what you need before we start. Fixed pricing, revisions included.